basics

BASICS 26

102 Claret

103 Rose

342 Pansy

405 Marine

406 Newport

407 Sage

408 Viridian

466 Violet

509 Midnight

510 Ocean

555 Bluebell

611 Plum

612 Raisin

643 Primrose

686 Hunter

713 Granite

714 Nickle

717 Beige

719 Black Dot

815 Toast

816 Smoke

817 Saddle

818 Coffee

942 Iris

STYLE NAME	Basics 26
PRODUCT TYPE	Broadloom
CONSTRUCTION	Tufted
SURFACE APPEARANCE	Level Heathered Loop
FIBER TYPE	Chromell® SD Nylon
GAUGE	1/10 (39.37 rows per 10 cm)
PILE WEIGHT	26.0 oz. per sq. yd. (882 g/m2)
PILE THICKNESS	.157" (3.99 mm)
STITCHES PER INCH	10.3 (40.55 per 10 cm)
DYE METHOD	Solution Dyed
PROTECTIVE TREATMENT	Sentry Plus
DENSITY	5,962
WEIGHT DENSITY	155,012
PRIMARY BACKING	Woven Polypropylene
BACKING FOUNDATION	Single Primary
SECONDARY BACKING	Woven Polypropylene
PATTERN REPEAT	None
width	12' (3.66 m)
FLAMMABILITY	ASTM E 648 Class 1 (Glue Down)
SMOKE DENSITY	ASTM E 662 Less than 450
STATIC PROPENSITY	AATCC-134 Under 3.5 KV
IAQ GREEN LABEL	14148216
WARRANTIES	Lifetime Limited Wear Warranty, Lifetime Limited Colorfastness to Light, 10 Year Limited Colorfastness to Atmospheric Contaminants, 10 Year Sentry Plus Stain Warranty, Lifetime Static

ADDITIONAL INFORMATION:

Chair pads are recommended under office chairs with roller casters to enhance appearance retention, avoid premature or accelerated wear and act as a deterrent to delamination.

Walk-off mats are recommended at building entryways to reduce soiling.

To ensure a proper installation, a seam sealer must be used on all products where seaming is necessary. Reference to C.R.I. Manual #104-1994 is recommended for complete commercial installation.

Backings or other materials may be changed without prior notice when shortages occur or when technological advancements become available which provide for improvement of the product's performance.

This carpet is manufactured and recommended for indoor floor covering use only. We do not assume any liability; real or implied when carpet is applied otherwise.

Product specifications are derived from averages, resulting from normal manufacturing tolerances in yarn, fiber, temperature, humidity and color and may vary within normal industry tolerances. Specifications are subject to change. Performance is not affected by such variances.

Testing and Certification
Basics 26 (Flammability) Test Method: ASTM E-648
Basics 26 (Smoke) Test Method: ASTM E 662-79
Basics 26 (Electrostatic Propensity) AATCC Test Method: 134