circuit

CIRCUIT

455 Canyon Iris

545 Aztec Sky

556 Atmospheric Blue

578 Stormy Peak

651 Botanical Garden

656 Putting Green

658 Herbal Spice

669 Fusion Grey

825 Neutral Canvas

836 Lichen Boulder

838 Clay Pottery

856 Hemp Field

948 Stone Harbor

955 Rain Cloud

STYLE NAME	Circuit
PRODUCT TYPE	Broadloom
CONSTRUCTION	Tufted
SURFACE APPEARANCE	Textured Patterned Loop
FIBER TYPE	Chromell® SD Nylon
GAUGE	1/10 (39.37 rows per 10 cm)
PILE WEIGHT	28.0 oz. per sq. yd. (949 g/m2)
PILE THICKNESS	.140" (3.56 mm)
STITCHES PER INCH	11.7 (46.06 per 10 cm)
DYE METHOD	Solution Dyed
PROTECTIVE TREATMENT	Sentry Plus
DENSITY	7,200
WEIGHT DENSITY	201,600
PRIMARY BACKING	Woven Polypropylene
BACKING FOUNDATION	Single Primary
SECONDARY BACKING	Woven Polypropylene
PATTERN REPEAT	2" (W) x 1.6" (L)
width	12' (3.66 m)
FLAMMABILITY	ASTM E 648 Class 1 (Glue Down)
SMOKE DENSITY	ASTM E 662 Less than 450
STATIC PROPENSITY	AATCC-134 Under 3.5 KV
IAQ GREEN LABEL	14148216
WARRANTIES	Lifetime Limited Wear Warranty, Lifetime Limited Colorfastness to Light, 10 Year Limited Colorfastness to Atmospheric Contaminants, 10 Year Sentry Plus Stain Warranty, Lifetime Static

ADDITIONAL INFORMATION:

Chair pads are recommended under office chairs with roller casters to enhance appearance retention, avoid premature or accelerated wear and act as a deterrent to delamination.

Walk-off mats are recommended at building entryways to reduce soiling.

To ensure a proper installation, a seam sealer must be used on all products where seaming is necessary. Reference to C.R.I. Manual #104-1994 is recommended for complete commercial installation.

Backings or other materials may be changed without prior notice when shortages occur or when technological advancements become available which provide for improvement of the product's performance.

This carpet is manufactured and recommended for indoor floor covering use only. We do not assume any liability; real or implied when carpet is applied otherwise.

Product specifications are derived from averages, resulting from normal manufacturing tolerances in yarn, fiber, temperature, humidity and color and may vary within normal industry tolerances. Specifications are subject to change. Performance is not affected by such variances.

Testing and Certification
Circuit (Flammability) Test Method: ASTM E-648
Circuit (Smoke) Test Method: ASTM E 662-79
Circuit (Electrostatic Propensity) AATCC Test Method: 134